Sanding Sealer is a water-based acrylic basecoat. It provides initial sealing for all GF water-based topcoats except Enduro VAR and can be used over raw wood or a stained surface.

Product Description

General Finishes Enduro Sanding Sealer is a high quality, easy to apply, professional water-based acrylic that provides an excellent foundation for finish coats on wood. Its high solids nature fills the grain of the wood quickly and dries rapidly to form a hard, durable base coat. It sands easily with minimum effort without clogging paper. Enduro Sanding Sealer is non-flammable, low odour, and cleans up with soap and water. It has excellent water and chemical resistance properties and is easily top-coated with water-based finishes. Suitable for interior woodwork, furniture and cabinets. Use where a high-quality wood finish is mandated.

Application

HVLP: Use a 0.43” (1.1 mm) nozzle / tip assembly & #9 Air Cap. Airless& Air-Assisted Spray: 0.009”—0.011” tip. Allow 30 minutes -2 hours dry before sanding (temperature/humidity dependent). Sand with #220 micron or finer between coats. 1—2 coats recommended.

Dry Time

21°C and 50% R.H: · Dry: 15 - 60 minutes · To Sand: 30 minutes - 2 hours

Stain & Finish Recommendation

Can be used over most water base and solvent-based stains. For best results and superior colour and adhesion, General Finishes Water Base Stains & Dyes are recommended. Allow stains to dry thoroughly before applying Sanding Sealer.

Topcoat with General Finishes Enduro WATER BASE PRE-CAT LACQUER,  CLEAR POLY, FLAT OUT FLAT or HIGH PERFORMANCE. Allow Enduro SANDING SEALER to dry completely before top coating. Not designed for use with Enduro VAR.

Surface Preparation

Surface must be clean, dry, and free of all contaminants. Sand with 220 micron (320 mesn or finer between coats. Consult product label for additional information.